Why do special stainless steel screws rust?

Many customers do not understand why stainless steel special screws will rust, stainless steel special screws are not universal, under special reasons special screws will rust;Screw manufacturers summarize the reasons as follows:

1, stainless steel surface adhesion contains acid, alkali, salt substances (such as decoration wall alkali water, stone ash water splash), causing local corrosion.

2, stainless steel surface adhesion organic juice (such as melon and vegetable, noodle soup, sputum, etc.), in the case of water oxygen, constitute organic acid, organic acid corrosion on the metal surface for a long time.

3, the composition of stainless steel itself nickel and other trace elements are also related.Such as 304 is certainly not as good as 316 rust resistance.304 has better rust resistance than 201.

4, in the polluted air (such as the atmosphere containing a lot of sulfide, carbon oxide, nitrogen oxide), when condensed water, sulfuric acid, nitric acid, acetic acid liquid point, cause chemical corrosion.

5, stainless steel surface is deposited with dust containing other metal elements or other metal particles of the attachment, in the humid air, the attachment and the condensate between the stainless steel, the two together into a micro battery, caused the electrochemical reaction, the protective film is damaged, called electrochemical corrosion

SZQT Fastener Co., Ltd is a professional factory providing various stainless steel screws & other stainless steel fasteners. welcome your inquiry！

Advantages and disadvantages of common nuts

In some important cases, some anti-loose measures will be taken to ensure the reliability of the nut locking. The use of lock nut is one of the anti-loose measures. The working principle of the nut is self-locking by the friction between the nut and the bolt. However, the reliability of this self-locking in dynamic loads is reduced.

There are three types of lock nuts:

The first type is to drill a threaded hole (usually 2~3, evenly distributed on the outer round surface) on the outer surface of the nut to the inner circular thread surface, which is used to screw a small diameter countersunk head screw. Apply a centripetal force to the threads to prevent the lock nut from loosening. A disadvantage of such a lock nut is that it is difficult to disassemble and reload.

The second is to use two identical nuts to screw on the same bolt, and a tightening torque is added between the two nuts to make the bolt connection reliable.

The third is a special locknut that needs to be used with a lockable gasket. The special locknut is not a hex nut, but a round nut. The ball screw has 3~8 notches on the circumference of the nut (depending on the size of the nut and the manufacturer's product range). These gaps are Tighten the point of the tool and the snap-in of the lock tab.

Screws and nuts common using mistakes

1.The holes of screws and nuts are not suitable

On the machine bears the transverse load and the shear force action screw nut (such as the transmission shaft bolt, flywheel bolt), they and the bolt hole fit for the transition fit, assembly should be strong and reliable, and can withstand the lateral force.Some people do not pay attention to check in the assembly, bolt and bolt hole between the larger gap is still installed, the result of bolt loose or cut off accident.

2.screw nut to thick instead of fine

The machine on the important joint parts, such as the transmission shaft, fly shaft, etc., its bolt multi-purpose fine thread.When parts are missing in maintenance, coarse - tooth bolts are used instead.Due to the large internal diameter of fine tooth bolts, smaller pitch and outer Angle, high strength, good self-locking performance and other advantages, strong ability to withstand impact, vibration and exchange load;After replacing with coarse bolt, it is easy to loosen, take off and break, causing mechanical accidents.

3.screw nut a mother pad

In the installation, sometimes there will be assembly after the screw nut is too long phenomenon, so some people will be installed in a bolt on a lot of spring washer, so, in the process of strengthening the spring washer force is uneven, some will break, so that the bolt pre-tightening force down;Or produce eccentric load, reduce the reliability of bolt connection.

4.The washer of screw and nut is too large

Sometimes due to the lack of suitable washers, someone will use a larger diameter of the washer instead.In this way, the contact area between the bolt head and the washer is small, and the bearing pressure or locking force of the washer drops. Under the action of vibration and impact load, the bolt is easy to loosen.

5.Thicken nuts

Some people often mistakenly believe that thickening nuts can increase the number of working cycles of the thread, thus improving the reliability of the connecting parts, in fact, the thicker the nut, the more uneven load distribution between the threads, the more likely to lead to loose connecting parts.

6.The torque of the screw and nut is inconsistent

Many people think that the screw and nut should be "tight rather than loose", so they consciously increase the tightening torque of the screw and nut, resulting in screw and nut sliding buckle.

7.false strong snails

Bolt, nut or screw hole thread with rust stains, scale, iron filings, sand and other impurities, or join a joint surface impurities such as burrs, sediment, and not be removed before assembly, when tightening bolts, due to the effect of blocking of the impurity, on the surface of screw tightly, torque value meet the requirements, but actually has not really compact connection;In addition, there is a situation, due to the screw hole mud, scale and other impurities jacking role, although the bolt torque is in line with the provisions, but the working parts are not compressed.Under this false solidity, vibration, load shock, and temperature variations often cause bolts to loosen quickly.

8.Improper locking of screws and nuts

After screw and nut assembly, anti-loose device should be adopted for locking.When using cotter pin lock, the common mistake is to use too fine open lock or half open lock lock;The use of spring gasket locking, the common mistake is that the gasket opening error distance is too small, loss of elasticity;If the locking plate is used, the common mistake is to lock the locking plate at the corner of the nut.For double-nut locking, a common mistake is to put the thinner nut on the outside and not screw it tight enough.

About the screws head shapes and screws drives

A screw has two distinct characteristics：head shapes and screw drives.

Screws head shapes:

The shape of your screw head may not seem important, but each head type is made that way for a reason, usually enabling you to create your project easier, and with your preferred finish.

The head of a screw is where your screw will stop. Only the threaded part will be beneath the surface of your project, leaving the head outside, or flush with, the surface.

Some head shapes assist to create the look of the finished product, but they also usually have a purpose beyond aesthetics. The head shape of the screw also helps you drive the screw into your material using your force and the mechanics of the screws.

Screws drives:

The slotted screw drive simply has a single slot in the head of the fastener and is driven by a flat-bladed screwdriver. The slotted screw drive was the first to be developed and was for centuries the most common, simplest and cheapest drive to make. It works well when hand driven, but is not often used with power tools as the screw driver can easily slip out of the slot and damage the surrounding material.

The One Way Drive screw is a “tamper free” design. It is sometimes referred to as the one-way clutch. These screws are driven in with a standard flat-blade screwdriver but cannot be easily unscrewed because of the design. A special tool called a “one way tool extractor” can be used to unscrew it. Also various methods such as drilling, cutting, using locking pliers, and inserting a drill chuck into the head of the screw much in the fashion of removing screws with broken heads can be used.

The Hex Drive is a six point fastener head. It is often known as a hex head cap screw or a hex head machine screw. This head style can be driven with a wrench or with 6 or 12 point sockets.

The Hex Socket Drive has a rounded head with a hexagonal recess and is driven by a hex wrench often referred to as an Allen Wrench. There are tamper resistant versions with a pin in the recess.

Torx™ is the trademark for a type of screw head characterized by a 6-point-star-shape. It was developed in 1967. The official name given it by the International Organization for Standardization is “hexalobular internal driving feature”. The Torx™ is designed to allow for higher torque to be exerted on a screw when compared to a similarly sized hex socket head. Unlike Phillips drives, Torx™ heads were designed to prevent cam-out, allowing them to over torque the screw. Torx™ is commonly used in automobiles, computer systems, and consumer electronics. There is a tamper resistant Torx™ drive, which has a small pin inside the recess.

The Phillips design was created by John Thompson. When he was unable to convince manufacturers to use his products he sold the design to Henry F. Phillips. Phillips is credited with forming Phillips Screw Company which promoted and improved the design. The original patent ran out in 1966 although the company continued to develop improved designs. Phillips heads were designed to cause the screw driver to cam-out. Cam-out is a process by which a screwdriver slips out of the head of a screw being driven in once the torque needed to drive the screw exceeds a certain amount to prevent overtightening. The term “Phillips” is used in everyday language to refer to any head style with a crossed recess but this useage is not always accurate.

Different types of internal polygon screws/bolts

Type 1: Square head screws

The primary advantage to Square head screws is they are much less prone to “cam-out.” Cam-out refers to the slipping of the bit in the screw head as the screw is driven. The square-head screw was invented by P. I. Robertson, a Canadian, in 1908.

Type 2:Security hex screws

Security hex screws are designed to stop theft and vandalism. A security screw makes it more difficult for the vandal or criminal to get access to their target. ... Tanner is a leading distributor of security screws.

Type 3:Roberston screws

After badly cutting his hand while using a slot-headed screwdriver, Peter Lymburner Robertson invented the square-headed screwdriver and screw in 1908. He received the Canadian patent for his invention in 1909.

Type 4：Double-square screws

Type 5:Hex screws/bolts

A hex “tap” bolt is a term used to describe a fully threaded hex bolt. Many of our customers will use the terms “Hex Tap Bolt” and “Fully Threaded Hex Cap Screw” interchangeably. Remember, that in the U.S., a “bolt” is a fastener that is designed to be used with a nut.

Type 6:Hex socket set screws/allen head screws/cap head screws

In 1919, Dyke defined them as screws that are threaded all the way to the head. A socket cap screw, also known as a socket head capscrew, socket screw, or Allen bolt, is a type of cap screw with a cylindrical head and hexagonal drive hole.

Causes of machine screws thread failure

Screws are widely used in electrical engineering, automobile manufacturing, mechanical equipment, construction and decoration, food and medical machinery, petrochemical industry, shipping equipment, coal mine machinery, aviation instrument manufacturing, transportation facilities, steel furniture and other fields, and are very important products in modern life.

1. The screw has been corroded, and the thread of the screw will fail due to insufficient hardness, so new screws need to be replaced.

2. The combination deformation of screw pulling and torsion is caused, especially the torsion deformation will be twisted and broken when the thread connection is made, so the shear strength of the material is greatly less than the tensile strength.

3. Although the screw is small, it can be used for a wide range of purposes, so that the assembly and installation of any equipment cannot be separated from each other. Therefore, the screw manufacturer reminds you that if you want to use the screw, you need to choose products with good quality to ensure normal operation.

4. Weak separation from base metal and poor bonding force will lead to thread failure, so it is necessary to check whether the connection is correct.

SZQT supplys qualified machine screws,slef tapping screws,nuts,bolts,pins,retaining rings,rivets.

What's the difference between hexagon screws and inner hexagon screws?

Hex screws and inner hex screws are one of the fasteners, what's the difference?Hexagonal bolts are round on the outside and concave hexagonal on the middle, and hexagonal screws are the regular hexagonal sides of the heads.

The hexagonal screwdriver looks like "7", which is made by cutting and bending the hexagonal steel bar at both ends to form an inner hexagonal spanner, while the outer hexagonal screw is the hexagonal screw with more hexagonal edges on the head.

The biggest differences are:

Hexagon screws are often used in machinery, mainly for fastening, disassembly, not easy slip Angle and other advantages.Allen wrench is usually a square shape, 90 ° bend bend at one end of the long and short, with a short side of the screw, holding a long side can save a lot of strength and better tighten screw.The long end is divided into a round head (hexagonal cylinder is similar to a ball) and a flat head, which can be easily obliquely disassembled.The manufacturing cost of the outer hexagon screw is much lower than that of the inner hexagon, and its advantage is that the screw head (the spanner position) is thinner than the inner hexagon, which can not be replaced in some places.In addition, low cost, low dynamic strength, low precision requirements of the machine used hexagonal screws more than hexagon less.

SZQT Fastener factory is professionally supplying machine screws,self tapping screws,bolts,nuts,pins,retaining rings/waldes truarc,rivets.

Comes from: https://www.szqtfastener.com

Machine screws lubrication management method

In recent years, more and more fastener enterprises began to realize the importance of equipment machine screw lubrication.Some professional products and services such as oil testing services, precision filtration devices, special oil application, solve many equipment problems.Now, it seems that the comprehensive improvement of equipment gear box, friction pair oil selection, refueling, oil, pipe oil and other aspects is to obtain greater practical benefits.

At present most of the machine screw fasteners enterprises generally not establish special equipment lubrication management system, the lubricant is often overlooked, equipment failure, business leaders in the first place that is spare parts, machining accuracy, installation and other mechanical reasons, and neglect of accident more than 80% of the failures are caused by statistical regularity of oil, improper maintenance.Enterprises are short of the guidance of screw lubrication technicians. Over 95% of them, due to lack of knowledge of lubricant and neglect of lubrication work, have misused oil or improper oil, resulting in short service life of equipment, low production efficiency, frequent accidents, and unnecessary waste of energy.
The machine screw lubrication management method refers to the gear box and friction pair of equipment such as various types of cold-upsetting machine, continuous mesh belt furnace, chain-belt warm upsetting production line, punch, surface treatment coating or electroplating production line for fastener enterprises.Among them, gear box and friction pair are the core of lubrication 5-step management method.

1, pipe of oil
Set up active maintenance concept, change passive maintenance into active service.Use data to judge the wear boundary value, reduce more experience, less science, less sense of the way of thinking. Experience a healthy and sound lubrication chart, according to the computer lubrication chart operation.Constantly enrich and improve the formulation of various lubrication standards, necessary self-provided testing means and the combination of outsourced testing, the establishment and improvement of lubrication station (master station and sub-station).
On enterprise precision, large, scarce and critical equipment, fixed monitoring must be carried out to nip problems in the bud.Speed up the cultivation of lubrication technical personnel, using side project, side study, side cultivation of lubrication backbone rapid cultivation method.

2, choose oil
The weight is chosen according to the selection of oil (the main load, speed, temperature and medium of the cold header, and other conditions are considered if all four conditions are met). Oil should be selected in proper working conditions, and it is worth it, because the cost of equipment maintenance is more than 20 times of the cost of lubricating oil, and the cost of lubricating oil only accounts for 3% to 5% of the total maintenance cost.The upgrading and upgrading of oil products will become normal.

3, buy oil
The consumers must set up the oil purchase mode based on the equipment condition, and the concept of price selection must be changed.Oil and equipment procurement to comparison between three or even more, survival of the fittest.
Crude oil must be tested before application.Preferred product of famous brand, good after-sales service, can propose comprehensive lubrication solution of oil supplier cooperation.

4, refueling
The first thing you need to know is what kind of lubrication is needed for the lubrication points of the equipment.Under the condition of cold header, the intelligent oil collecting device is the best choice at present.
Company refueling equipment upgrade should adhere to comparison between three or even more, select the best option.It is very important to select a good supplier of lubrication equipment. The proposed scheme should be advanced in technology, reasonable in price, and provide whole-process tracking service, so as to cooperate with the lubrication equipment supplier who can propose a comprehensive solution.

5, oil
The institute focuses on three factors that cause oil deterioration, namely solid (particles, etc.), liquid (water, etc.) and gas.According to the test data of three factors, once exceed the standard, do rehabilitation treatment, two change oil.
In addition to purchasing an oil filter and purification plant or equipment, she adheres to the principle of comparison among three or even more suppliers, and chooses an oil filter and purification plant or equipment supplier that can provide comprehensive oil filter solutions. The proposed scheme should be advanced in technology, reasonable in price, and provide whole-process tracking service. Wipe off the oil mixture, avoid replacing the oil, and insist on changing the oil after cleaning.Insist on rehabilitation of oil products and recovery of waste oil,90 percent of oil products can be rehabilitated, true waste oil no more than 10 percent of the concept.

Shenzhen Qiangtuo Fastener Co., Ltd is a professional factory producing various kinds of machine screws,self tapping screws,bolts,nuts,pins,retaining rings,rivets. Qualified machine screws are available.

Problems with high strength fasteners

With the development and progress of the society, its industrial demand for fasteners is getting higher and higher. At present, high strength fasteners have a good prospect of development. However, there are still some problems with homemade high-strength fasteners.

1. Fastener is not qualified in hardness
Hardness is an important index of assessment fasteners, mechanical properties, for each performance level product adopted by the material is different, fasteners, choose when mechanical performance level is an important basis, the installation and use of working load should be determined according to the level of performance and installation torque, for a specific material, hardness should be controlled in a reasonable level, high hardness may reduce the fatigue resistance of the products, some enterprises in order to improve the strength of the product, the hardness at higher levels, caused part of the product.

2. The fastener guarantees the load and the wedge load is unqualified
Ensuring load and wedge load is the key item A for testing the mechanical properties of products under tensile load, especially for high strength fasteners.The guarantee load is to check the product's resistance to plastic deformation under the specified tension load. If the index fails to meet the requirement, the plastic deformation may be generated due to the effect of the pre-tightening force and the working load, thus reducing the pre-tightening force and making the connection loose.Wedge load test is to examine the tensile strength of bolt product and the combined strength of head rod. This index is unqualified. Under the action of large working load, especially the impact load, or when the support surface is under the action of partial load, it will break or turn around, resulting in connection failure and even safety accident.

3. Fastener size is out of tolerance
Fastener is a generic components, the size of the interchangeability requirement is higher, super bad will directly affect the compatibility, and even affect the connection strength, locking performance or life. The main cause of unqualified size one is the improper control of technical process, in order to save material will be part of the size control near the lower limit, no timely adjust equipment in the production process, using the ultra poor workers die: the second is the lack of inspection, process inspection and delivery inspection is lax, make some unqualified batch of qualified;Third, the measuring equipment in use can not be measured regularly, or even use more than the wear limit of the gauge.

4. The fastener decarburization layer is out of standard
The decarburization layer is also A type A project. Due to decarburization, the surface hardness and strength of the parts are greatly reduced, which seriously affects the surface contact strength and fatigue life of the fasteners. Decarburization is mainly caused by decarburization of raw materials, decarburization in the process of material reform and product heat treatment.

Qiangtuo Fastener Co., Ltd established since 2001,we can provide high quality high strength fasteners,including stainless steel eye bolts,stainless steel screws,stainless steel Hex Nuts,etc.Non-standard parts are also available.

Why QT providing one-stop service to customers?

1.what does “one-stop” services mean?
One-stop service means business body has the capability of supplying all a customer's needs within a particular range of goods or services. So that customers do not have to go to different places or ask different people.

2.Why does QT provide one-stop service?
A.QT has the capability to meet our customers’ needs. We have our factory,technical engineers ,equipment etc, these all can make this service come true.
B.QT with a view to uptimize our quality &service continuously, we are always try our best to provide better service to customers.
C.Our customers need one-stop services,this is a development tendency. This service can save customers’ time and energies, creately improve efficiency.

3.How to achieve win-win situation with customers?
A.Quality & service guarantee
B.Trusting and understanding each other
C.Focus on long-term development

QT is a professional fastener factory. We have over 17 years experience in this industry. We are trying to be the qualified one-stop fastener partner with all of our customers. QT provides all kinds of screws:machine screws,self tapping screws,nuts,bolts,washers. Welcome your enquiry!

The definition of machine screws | Shenzhen Qiangtuo Fastener Co., Ltd

What is a machine screw?
The definition of machine screws:A stove bolt is a type of machine screw that has a round or flat/plain head and is threaded to the head. They are usually made of low grade steel, have a slot or Phillips drive, and are used to join sheet metal parts using a hex or square nut.

What are threads on a screw?
A screw thread, often shortened to thread, is a helical structure used to convert between rotational and linear movement or force. A screw thread is a ridge wrapped around a cylinder or cone in the form of a helix, with the former being called a straight thread and the latter called a tapered thread.

What is a screw used for simple machines?
Geometrically, a screw can be viewed as a narrow inclined plane wrapped around a cylinder. Like the other simple machines a screw can amplify force; a small rotational force (torque) on the shaft can exert a large axial force on a load.

Common Types of Screw Drives
1.There are literally hundreds of screw drives.
2.Common screw drives include slotted, Phillips, Hex, Hex socket (Allen), security hex socket (pin in hex socket) Torx T & TX, and One-Way.
3.The slotted screw drive simply has a single slot in the head of the fastener and is driven by a flat-bladed screwdriver.

What is the difference between a machine screw and a bolt?
Typically, a universally accepted distinction between a screw and a bolt does not exist. A screw is an externally threaded fastener capable of being inserted into holes in assembled parts, of mating with a preformed internal thread or forming its own thread, and of being tightened or released by torqueing the head. Machine screws sizes are always smaller than bolts. There are metric machine screws and non-standard pieces in the fasteners market for purchasers choosing.

Carriage bolts introduction | Shenzhen Qiangtuo Fastener Co., Ltd

What are Carriage Bolts?
A carriage bolt, coach bolt or round head square neck bolt is a form of bolt used to fasten metal to wood.There is a huge variety of fasteners or bolts today. Different types of bolts have their own set of properties, advantages, and areas of application.These bolts are also referred by the name coach bolt. Just like other bolts, the carriage bolts can be of various types.

Types of carriage bolts
Here are some of the most commonly used types of carriage bolts, along with their properties:
1.Round Head, Ribbed Neck: These carriage bolts are made from low carbon steel. These types of coach bolts have serrated or ribbed shoulders and feature a round head.
2.Round Head, Short Neck: These bolts have a round head, and a short and square-shaped shoulder. They have a unified thread pitch, and are generally made from low or medium carbon steel.
3.Flat Head, Square Neck: As the name suggests, they feature a flat head, which gives a lower profile on the top or front side of fastening as compared to that of a round head bolt.
4.Fin Neck: The fin neck carriage fasteners are most commonly made from low carbon steel material. These fasteners feature a round head and a flat bearing surface. The bearing surface of these bolts makes a 90° angle with the shank.

Applications of carriage bolts
1.used in soft and ductile metals, plastics and wood.
2.Short neck bolts makes them suitable for use with sheet metal, as a standard size neck can create an obstruction.
3.Garage door industry or other applications
4.The fin neck bolts are mainly used in thin plywood.

Shenzhen Qiangtuo Fastener Co., Ltd | Knowledge of drywall screws

Definition of drywall screws:
Specialized screw with a bugle head that is designed to attach drywall to wood or metal studs, however it is a versatile construction fastener with many uses. The diameter of drywall screw threads is larger than the grip diameter.Drywall screws have deeper threads than regular screws, which prevents them from dislodging easily from the drywall. They are made of steel and require a power screwdriver to drill them into the drywall. In addition, drywall screws are often used along with plastic anchors that help distribute the weight of the hung object evenly over the surface.

Types of drywall screws:
Drywall screws are classified according to length and pitch. There are two common types of drywall screw lengths: S-type and W-type. S-type screws are designed for attaching drywall onto metal. Their sharp points make penetrating the surface easier. W-type screws, on the other hand, are longer and thinner. They are designed for installing drywall onto wood. Although drywall panels differ in thickness, it’s usually sufficient to drive W-type screws into the wood at least 0.63 inches (1.6 centimeters), and for S-type screws to penetrate a metal stud to a depth of 0.38 inches (0.9 centimeters) If you are screwing through multiple layers, make sure the length of the screw is enough to penetrate at least 0.5 inches (1.3 centimeters) into the second layer.
In addition, specialty drywall screws are designed for specific purposes. For example, when you install drywall onto heavy metal studs, it’s best to use self-drilling drywall screws, eliminating the need to drill holes in advance. Additionally, there are coated drywall screws that protect against corrosion.

How to Choose the Right Drywall Screws:
Drywall screws are a little more expensive, but they do provide a stronger hold. There are many drywall fasteners that come in the form of a Philips head, but they are not all the same in terms of performance and value. The screw you choose will largely depend in the drywall application you have in store, but also on the quality of screw you are looking for. Here are four of the most common drywall screws used to hang gypsum:
1.Self-Drilling - Also used as pan head screws, these are effective for metal stud framing.
2.Course - These have course threads that securely fasten drywall to its studs.
3.Fine - These screws have smaller heads and finer threads that work well to secure gypsum board.
4.Trim-Head - Use these screws to attach wood trim over drywall.

more information link to :https://www.szqtfastener.com